ELETTROLASER MS 3.5, Руководство пользователя и по обслуживанию

Страница: 40 / 108

code: UMS012 review: 0.2 date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual page 40 of 102
•
Connect the control pedal of the machine:
▪
Connect the male connector of the trigger control pedal to the female DB-9 female serial port (Fig. 6-8), located on the rear
of the machine;
▪ Place the control pedal on the floor, in front of the machine.
Fig. 6-8 - Position of control pedal connection
•
Connect the electrical cable and then the plug it into the power supply network (please refer to paragraph 6.8);
•
If required, connect the compressed air supply (please refer to paragraph 6.10);
•
If required, connect the shield gas supply (please refer to paragraph 6.10);
•
Fill up the cooling circuit tank with cooling liquid (please refer to paragraph 7.3.1).
PROHIBITION!: If the machine must be moved, pay attention not to tilt it or flip it over, to avoid cooling liquid leaking into the
machine.
6.8 Lighting
WARNING!: The installation site must feature sufficient lighting for the performance of use and maintenance operations.
The optimal lighting level obviously varies according to the type of operations to be performed; please refer to the EN 12464-1
standard (paragraph 5.3) for detailed information concerning the type of activity and the work environment
.
Female serial port