ELETTROLASER MS 3.5, Руководство пользователя и по обслуживанию

Страница: 36 / 108

code: UMS012 review: 0.2 date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual page 36 of 102
Fig. 6-3 –
Handling technique
•
Keep the load as close as possible to your body;
•
Distribute the load on both sides;
•
Keep your view clear;
•
Ensure at least two operators manage the lifting of bulky loads (Fig. 6-4);
•
Observe the limits concerning maximum weight liftable by one person;
•
If the load is too heavy or lifting it requires a noteworthy physical effort, it is advisable to opt for one of the following solutions:
▪
Use auxiliary tools,
▪ Divide the load into multiple parts that can be transported individually,
▪ Transport the load with help from another person.
If certain components need to be moved by pushing or pulling, observe the following general indications:
•
Always operate in a stable position;
•
If possible, place the load on devices with wheels;
•
It is preferable to push by leaning your back against the load and keeping your arms parallel to your body; if you push the load
frontally, make sure you keep your back straight;
•
Remember it is always preferable to push rather than pull;
•
If pulling is required, always use secure gripping points (ones that will not break due to the pulling operation).
Fig. 6-4 -
Handling technique