26
INSTALLER INFORMATION
Log Arrangements Vesuvius100 log set
Only the ceramics supplied with this appliance are to be used. The ceramics must be laid only as
shown on this page. Replacement parts are available from your dealer, but should only be installed by
a qualified installation engineer.
Ensure that the grate is sitting firmly in the base of the fire box, with the long slot in the centre of the
Grate aligning with the centre slots on the Burner Tube.
The Pilot flame must be visible through
the grate and the cut-out in the Pilot Shield. Make sure there is a 1 cm gap between the log in
drawing 2 and the back wall of the fire.
Ensure that a number of holes in the Grate and the Pilot area are free of embers.
After placing the embers and logs according to figure 1-8 sprinkle some ashes over the logs and embers.
Finally check the pilot is clear, no embers have entered the Pilot area
and the cross lighting is good before the glass is replaced.
Содержание vesuvius 100
