Electrostatic Technology, Inc
FlexiCoat
®
Model 300 Coater
Serial #20158
5
4.4
INTENDED
USE
WARNING:
Use of this equipment in ways other than described in this manual
may result in personal injury, death, or property and equipment damage. Use
this equipment only as described in this manual.
ETI cannot be responsible for injuries or damages resulting from nonstandard,
unintended applications of its equipment. This equipment is designed and
intended only for the purpose described in this manual. Uses not described in
this manual are considered unintended uses and may result in serious personal
injury, death, or property damage. Unintended uses may result from taking the
following actions:
•
Making changes to equipment that have not been recommended or described in
this manual or using parts that are not genuine ETI replacement parts.
•
Failure to make sure that auxiliary equipment complies with approval agency
requirements, local codes, and all applicable safety standards.
•
Using materials or auxiliary equipment that are inappropriate or incompatible
with your ETI equipment.
•
Allowing unqualified personnel to perform any task.
4.5
INSTALLATION
Read the installation section of all system components manuals before installing your
equipment. A thorough understanding of the system components and their
requirements will help you install the system safely and efficiently.
•
Allow only qualified personnel to install ETI and auxiliary equipment.
•
Use only approved equipment. Using unapproved equipment in an approved
system may void agency approvals.
•
Make sure all equipment is rated and approved for the environment in
which you are using it.
•
Follow all instructions for installing components and accessories.
•
Install locking, manual, shutoff valves in the air supply lines to the system.
This allows you to relieve air pressure and lock out the pneumatic system
before undertaking maintenance and repairs.
•
Install a locking disconnect switch or breaker in the service line ahead of any
electrical equipment (if applicable).
