Electrostatic Technology, Inc
FlexiCoat
®
Model 300 Coater
14 Serial
#20158
6.2 FLEXICOAT
®
COLLECTOR
(continued)
A Differential Pressure Gauge is located on the side of the Collector Module. This
gauge provides an indication of cleanliness of the Filter Cartridges. A normal reading
would be between 0 and 3.5. A reading above 3.5 would indicate the Filter
Cartridges are not being cleaned well enough. This would require resetting the unit
so the reverse cleaning pulses are more frequent and/or increasing the air pressure to
the pulse circuit.
6.3
FLUIDIZING HOPPER/POWDER FEED PUMP
The Fluidizing Hopper is located behind the coating bed. It is a fluidized hopper with
a pump, which is manually loaded with either virgin powder or a combination of
virgin and reclaimed material. Powder is automatically fed into the coating bed by
the Powder Feed Pump on demand, by a signal from the Powder Level Sensor. The
feeder hopper holds approximately 1.2 cubic feet (.034 cubic meters) of powder.
IMPORTANT: DO NOT DROP ANY FOREIGN MATTER INTO THE
POWDER AS THIS WILL JAM THE FEEDER.
