Electrostatic Technology, Inc
FlexiCoat
®
Model 300 Coater
8
Serial
#20158
4.6 OPERATION
(continued)
•
Shut off moving equipment before taking measurements or inspecting work
pieces.
•
Wash exposed skin frequently with soap and water, especially before eating or
drinking. Do not use solvents to remove coating materials from your skin.
•
Do not use high-pressure compressed air to blow powder off your skin or
clothes. High-pressure compressed air can be injected under the skin and cause
serious illness or death. Treat all high-pressure fittings and hoses as if they
could lead and cause injury.
4.7
LESS OBVIOUS DANGERS
Operators should also be aware of less obvious dangers in the workplace that often
cannot be completely eliminated:
•
Exposed surfaces on the equipment which may be hot or have sharp edges and
cannot be practically safeguarded.
•
Electrical equipment which may remain energized for a period of time after the
equipment has been shut off.
•
Vapors and materials which may cause allergic reactions or other health
problems.
•
Automatic hydraulic, pneumatic, or mechanical equipment or parts that may
move without warning.
•
Unguarded, moving mechanical assemblies.
4.8
ACTION IN THE EVENT OF A SYSTEM OR COMPONENT MALFUNCTION
Do not operate a system that contains malfunctioning components. If a component
malfunctions, turn the system OFF immediately.
•
Disconnect and lock out electrical power. Close and lock out hydraulic and
pneumatic shutoff valves and relieve pressures.
•
Allow only qualified personnel to make repairs. Repair or replace the
malfunctioning component.
