8
Step 3: Test the detectors
1.
Go to the main display press
'
√ʹ
.
2.
Enter your installer code (default code '1111').
3.
Enter
[7]>[07]>[2]
(Service
>
Transmitters
>
TX Test) to initiate the TX communication
test. This test enables you to identify transmitters and test their signal strength.
4.
Activate the transmitter you wish to test; the transmitter’s details appear on the
Prime LCD and a sequence of tones is heard indicating the transmitter’s signal
strength (
Table 4
).
Signal Strength
Tones
Note:
If the signal strength is less than
6, move the transmitter to a
better location
.
0-2
1 Tone
3-5
2 Tones
6-8
3 Tones
8-9
4 Tones
Table 4: Signal strength
In addition the display shows the detectors status using the abbreviations (as seen in
Table 5
).
Table 5: Abbreviations
Item
Description…
Item
Description…
OK
The transmitter is
functioning correctly
OS
The transmitter is not
synchronized
TA
Tamper condition
NA
The transmitter is inactive
BT
Battery low