5
3.
System Programming
3.1.
Keys Menu Navigation
This manual explains how to program the
Prime
from the keypad located on the main unit.
Table
1
describes the uses of the keypad keys during programming.
Enter / Save (to move to the displayed menu or to save the updated data).
Used to cancel the current selection or to return to the previous menu level.
/
To scroll up or down through the menu options
[1]-[0]
1.
To enter numeric values when required.
2.
For quick key programming. Press the key number to access a programming
option.
3.
To edit descriptors.
Table 1: Keypad usage
3.2.
Enter Installer Programming mode
1.
Go to the default display press
√
.
2.
Enter your installer code (the default installer code is
'1111'
).
3.
Using the arrow keys, select
[9]
Programming.
3.3.
Registering Wireless Devices
In order to enable the
Prime
to recognize a device, its transmitter must be registered.
It is recommended to register all devices to the control panel before installing. To install the
wireless devices/accessories
temporarily
fit them to the desired locations, and then perform a range
test. Testing may show that you should relocate the panel or some of its devices/accessories.
Note:
For wireless siren registration refer to the full installer manual.
