15
4.
Testing the System
Before leaving the site, it is important to fully test the system. Prime has several testing tools to
verify that the system will operate optimally, including the wireless communication
1.
Go to the main display and press
'
√ʹ
2.
Enter installer code
3.
Go to quick key displayed in
Table 9
.
Quick
key
Option
Description and Notes
7>0>3
WL Siren
Test
The external siren is sounded briefly
7>0>4
Siren Test
Built-in siren is sounded briefly
7>0>6
Walk Test
A list of registered sensors appears. Trigger each sensor; when the
system receives a successful transmission from a sensor, the sensor is
removed from the list
7>0>7>1
TX List
This test is a scrollable inventory of all registered transmitters and their
last reported status. Using the arrow buttons, scroll through the
transmitter list. The TX list displays the zone/device number or
descriptor.(Press the key to toggle the display) , the signal strength of
the last received transmission and the last received status of the
transmitter
7>9>1
GSM Signal
Strength
Display the signal strength of the cellular network. In severe cases of
low GSM signal consider using external GSM antenna.
Table 9: Quick keys