12
3.5.
Set Up Follow Me Destination
The Follow-Me feature is designed to notify the user that an alarm event has occurred. Set up
follow me accounts as follows;
1.
Go to the installer programming menu [9].
2.
Select [5]>[1] (Communication > Accounts)
3.
Select the account to be used for Follow Me and press '
√
'.
Note:
Account number 3 is designed for use Follow me feature. It is the only telephone number
that can be programmed by the user in the following location (only if defined as SMS or
TWA): Main menu > [5]. Follow Me Number. Accounts 4-6 are defined by default as Voice
report.
4.
Go to Follow Me telephone number and press '
√
'
5.
Select the protocol from the following options:
Two Way Audio Follow Me (Accounts 1-3)
SMS Follow Me (Accounts 1-3)
Voice Report (Accounts 4-6)
6.
Define the communication interface for the Follow me: PSTN or GSM.
7.
Scroll thorough the other menu parameters and press '
√ʹ to confirm.
3.6.
Set Time & Date
The time and date are used to time stamp events in the event log. Additionally the time is
displayed on the LCD.
1.
Go to the main display press
'
√ʹ
.
2.
Enter installer code (default code '1111')
3.
Select
[7] > [0] > [1]
(Service
>
Set Time/Date).
4.
Select
[1]
Set Time. Enter the current time and press
'
√ʹ
5.
The display shows
[2]
Set Date option. Enter the current date and press
'
√ʹ
.
Note:
If the time is set in 12hr format, use the key to toggle between AM and PM.
