Electrolux Side by Side Refrigerators, Руководство по обслуживанию

Страница: 8 / 100

7
DOOR REMOVAL
NOTE: If installation requires the removal of the
doors, trace around all hinges with a soft lead pencil
for easy relocation.
1. Disconnect electrical supply.
2. Open both doors, then remove toe grille.
3. Close doors.
To Remove Refrigerator Door:
1. Remove top hinge cover screw. Remove cover.
2. Trace around hinge with soft lead pencil. This will
make it easier to realign doors when they are replaced.
3. Remove top hinge.
4. Lift refrigerator door off bottom hinge pin. Set door
aside.
5. Remove bottom hinge, if necessary.
6. Reverse this procedure to reinstall refrigerator door.
To Remove Freezer Door:
1. Disconnect water line that goes through lower hinge
of freezer door at connection located under front of
freezer: grip water line firmly in one hand, then with
3/8
" wrench or fingers, push in on gray collar to
release water connector.
2. Remove top hinge screw on freezer door, then
remove cover.
3. Disconnect wiring harness connector plug at top
hinge: place your thumbs on flat sides of each
connector bending both sides back and forth, then
with form grasp, pull both pieces apart.