manualshive.com logo in svg

Electrolux Side by Side Refrigerators, Руководство по обслуживанию

Поделиться
Скачать
Electrolux Side by Side Refrigerators Скачать руководство пользователя страница 6

5

ATTENTION!!!

This service manual is intended for use by persons having electrical and mechnical training
and a level of knowledge of these subjects generally considered acceptable in the appliance
repair trade. Electrolux Home Products cannot be responsible, nor assume any liability, for
injury or damage of any kind arising from the use of this manual.

©

 2001 White Consolidated Industries

SAFE SERVICING PRACTICES - ALL APPLIANCES

To avoid  personal injury and/or property damage, it is important that 

Safe Servic-

ing Practices 

be observed.  The following are some limited examples of safe

practices:

1.

DO NOT

 attempt a product repair if you have any doubts as to your ability to

complete it in a safe and satisfactory manner.

2. Before servicing or moving an appliance:

• Remove the power cord from the electrical outlet, trip the circuit breaker to the

OFF position, or remove the fuse.

• Turn off the gas supply.
• Turn off the water supply.

3. Never interfere with the proper operation of any safety device.

4.

USE ONLY REPLACEMENT PARTS CATALOGED FOR THIS
APPLIANCE. SUBSTITUTIONS MAY DEFEAT COMPLIANCE WITH

SAFETY STANDARDS SET FOR HOME APPLIANCES.

5.

GROUNDING

:  The standard color coding for safety ground wires is 

GREEN

, or

GREEN 

with 

YELLOW STRIPES

. Ground leads are not to be used as current

carrying conductors. It is 

EXTREMELY 

important that the service technician

reestablish all safety grounds prior  to completion of service.  Failure to do so  will

create a hazard.

6. Prior to returning the product to service, ensure that:

• All electrical connections are correct and secure
• All electrical leads are properly dressed and secured away from sharp

edges, high-temperature components, and moving parts

• All non-insulated electrical terminals, connectors, heaters, etc. are

adequately spaced away from all metal parts and panels

• All safety grounds (both internal and external) are correctly and securely

connected

• All panels are properly and securely reassembled

Содержание Side by Side Refrigerators





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды