Electrolux NEAT Скачать руководство пользователя | Manualshive

Страница: 8 / 50

background image

TSE-P 04.00 EB

8/50

599 34 22-16

“INTENSIVE” / “HEAVY SOIL” button

This option can be selected during the entire duration of the washing programme, and is available only in
cycles for COTTON and SYNTHETICS.
This option increases the phases of drum movement after the heating phases.
The INTENSIVE / HEAVY SOIL option cannot be selected together with the STAINS, QUICK CYCLE and
ECONOMY options.

“QUICK CYCLE - LIGHT SOIL” / “DAILY” button

This option can be selected during the entire duration of the wash programme, and is available in cycles for
COTTON, SYNTHETICS and DELICATE FABRICS: it reduces the duration of the cycle.
When this option is selected in COTTON cycles, it modifies the rinse sequence as well as reducing the
times: one rinse is eliminated, and the water fill level in the remaining rinses is increased.
The QUICK CYCLE - LIGHT SOIL” / DAILY option cannot be selected together with the STAINS,
INTENSIVE and ECONOMY options.

“LEVEL OF SOILING” button

This option can be selected during the entire duration of the washing programme.
The standard programme is set for NORMAL soiling. By pressing this button, the level of soiling can be
modified:

Þ

HEAVY (this option can be selected only in cycles for COTTON and SYNTHETICS).

LIGHT - QUICK CYCLE (this option can be selected only in cycles for COTTON, SYNTHETICS and
DELICATE FABRICS).

The functions of these options are as described for the corresponding individual buttons.

“ECONOMY” button

This option can also be selected during the washing cycle, and is available only in cycles for COTTON and
SYNTHETICS with temperatures of 40

°

C or higher.

The ECONOMY option reduces the temperature of the programme and increases the drum movement
phases after the heating phases.
The ECONOMY option cannot be selected together with the INTENSIVE/HEAVY AND LIGHT SOILING and
QUICK CYCLE / DAILY options.

"BIO" button

This option can be selected only after selecting the type of fabric, and can also be selected during the
washing phase. The BIO option can be selected only in cycles for COTTON and SYNTHETICS with
temperatures of 40

°

C or higher.

The BIO option adds a 10-minute phase of motor movement after heating to 40

°

C, and is designed to

activate the enzymes contained in the detergent.

“EXTRA RINSE” button

The EXTRA RINSE option can be selected at any time up to the end of the washing phase, and adds one
rinse phase in cycles for COTTON, SYNTHETICS and DELICATES.

«
...
6
7
8
9
10
...
»

Содержание NEAT



















































Отзывы:

Нет отзывов

Похожие инструкции для NEAT

Бренд: bar aid Страницы: 16

Бренд: Haier Страницы: 23

Бренд: Malber Страницы: 16

Бренд: Samsung Страницы: 132

Бренд: Magic Chef Страницы: 13

WAREFORCE UH 30

Бренд: Jackson Страницы: 57

Бренд: V-TUF Страницы: 15

AdoraDish V6000

Бренд: V-ZUG Страницы: 60

Бренд: Kärcher Страницы: 13

Бренд: Hanseatic Страницы: 88

Бренд: Zanussi Electrolux Страницы: 28

Бренд: Cylinda Страницы: 46

Бренд: Hotpoint Ariston Страницы: 24

Бренд: Lavor Страницы: 12

Бренд: Gude Страницы: 49

Бренд: Kärcher Страницы: 516

Бренд: Daewoo Страницы: 46

Бренд: Hotpoint Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды