Electrolux 2.7 Cu. Ft. Tubs Скачать руководство пользователя

Страница: 70 / 80

2. Disconnect the wiring and hoses from the valve.

3. Gain access to the rear of the washer and remove

the two screws holding the valve to the rear panel.

Alternate water valve attachment:

3. Gain access to the rear of the washer and remove

one screw holding the valve to the rear panel.

Replacing the top:

1. Disconnect the washer from electrical supply.

2. Remove the console and disconnect the ground

wire.

3. Raise the top, unfasten the lid lock assembly, the

wiring to the lid lock assembly and nozzel assem-

bly from the top.

4. Remove the lid and the dispenser top.

5. Disconnect the line cord, pull the wiring and

pressure hose through the opening in the top and lift

the top off the hinges.

Removing the top hinges:

1. Gain access to the rear of the washer, remove the

one screw holding the hinge to the rear panel and

pull and rotate the hinge up.

Removing the water inlet valve:

1. Disconnect the washer from electrical supply, turn

the water off and raise the top.

Содержание 2.7 Cu. Ft. Tubs

















































































Результаты поиска

Содержание 2.7 Cu. Ft. Tubs

Отзывы:

Похожие инструкции для 2.7 Cu. Ft. Tubs

Бренды по названию

Популярные бренды

Electrolux 2.7 Cu. Ft. Tubs, Руководство по обслуживанию

Результаты поиска

Содержание 2.7 Cu. Ft. Tubs

Отзывы:

Похожие инструкции для 2.7 Cu. Ft. Tubs

Бренды по названию

Популярные бренды