Electrolux 2.7 Cu. Ft. Tubs страница 13 Скачать руководство пользователя

Страница: 13 / 80

Knits & Delicates Cycle

Provides 6 minutes of wash agitation for delicate items

or 3 minutes of wash agitation for hand washables.

Soak & Prewash Cycle

Soak

Use Soak to treat heavily soiled or stained items.

Soak provides 3 minutes of agitation and 12 minutes

of soaking time. The load then advances into the

Prewash portion of the cycle.

Use the amount of detergent recommended for a

normal wash cycle. If desired, use bleach or a

soaking agent for colorfast items.

The Soak water temperature is the same as the

rinse water temperature selected.

Select the Agitate/Spin Speed appropriate for the

items being soaked.

Select Wash Cycle Option

OFF

if advancing into

the Whites cycle is not desired.

Follow Soak with a complete wash cycle using the

normal amount of detergent.

Prewash

Use Prewash when soaking is not necessary.

Prewash helps remove protein-based stains such

as milk, grass and blood. It also helps loosen soils

before washing. Prewash provides 3 minutes of

wash agitation.

Use the amount of detergent recommended for a

normal wash cycle.

The Prewash water temperature is the same as the

wash water temperature selected. To avoid setting

protein stains, select cold water.

Select the Agitate/Spin Speed appropriate for the

items being prewashed.

Select Wash Cycle Option

OFF

if advancing into

the Whites cycle is not desired.

Follow Prewash with a complete wash cycle using

the normal amount of detergent.

Power Scrub Option

Select

Power Scrub

to automatically advance a load

from the Soak or Prewash setting into the Whites wash

and Extra Rinse cycles.

1. Add the measured amount of detergent to wash

tub, then add wash load.

2. Select appropriate Wash/Rinse Temperature,

Load Size, and Agitate/Spin Speed.

3. Select Power Scrub under Wash Cycle Options.

To use a cycle other than Whites after the Soak

or Prewash settings, select

OFF

and manually

advance cycle selector to cycle desired.

4. Fill fabric softener dispenser with the

recommended amount of LIQUID detergent.

Add water to bring liquid level to fill line on dispenser

cap.

When selecting Power Scrub, the fabric softener

dispenser must be filled with diluted liquid

detergent at the beginning of the Soak or Prewash

setting. The detergent for the Whites cycle will

then be dispensed after the spin in Prewash.

DO NOT

use powdered detergent in the dispenser.

Clean the fabric softener dispenser thoroughly

after each use. Fabric softener and liquid detergent

should not be mixed.

5. Set the cycle selector at Soak or Prewash and

pull knob to start.

The washer will provide Soak

or Prewash as selected. It then automatically

advances to the full Whites and Extra Rinse cycles.

Automatic Extra Rinse Option

Select

Automatic Extra Rinse

Power Scrub/Extra

Rinse

to provide an extra rinse at the end of the Whites

cycle.

Controls

Always follow instructions on fabric care labels.

AGITATE/SPIN SPEEDS

offers three agitation speeds

and four combinations of agitation and spin speeds for

any cycle. The following chart suggests agitate/spin

speeds for basic fabric types.

Fabric Type

Agitate/Spin Speed

Regular

Normal/Normal

Perm Press

Normal/Normal

Knits

Gentle/Normal

Delicates / Washable woolens Gentle/Gentle

Hand washables

Extra Gentle/Gentle

Содержание 2.7 Cu. Ft. Tubs

















































































Результаты поиска

Содержание 2.7 Cu. Ft. Tubs

Отзывы:

Похожие инструкции для 2.7 Cu. Ft. Tubs

Бренды по названию

Популярные бренды

Electrolux 2.7 Cu. Ft. Tubs, Руководство по обслуживанию

Результаты поиска

Содержание 2.7 Cu. Ft. Tubs

Отзывы:

Похожие инструкции для 2.7 Cu. Ft. Tubs

Бренды по названию

Популярные бренды