Electrolux Professional Clarus Vibe WH6-11, Руководство по установке

Страница: 29 / 48

Installation manual
29
9.6 Connection of external functions
9.6.1 Outputs
Depending on machine configuration, the outputs are configured according to the following table:
Connection Config. 22A Config. 22B
Terminal 12 Steam valve (if dual heating) Steam valve (if dual heating)
Terminal 13 n/a Liquid 1
Terminal 14 n/a Liquid 2
Terminal 15 n/a Liquid 3
Terminal 16 n/a Liquid 4
Terminal 18 Program run Program run
If the external power (e.g. 24V DC) is being used, connect the power supply to terminal 9 and 10.
If the internal power (230V from the machine) is being used, connect a jumper from terminal 1 (N) to 9 and a jumper
from terminal 2 (L) 10. Max load to the outputs is 0.5A.
Note!
On machines with Dual heating, the Steam valve is controlled by internal power (230V), which means that
the terminals 9 and 10 are already occupied. Since all outputs share the power source, the rest of the outputs
will refer to internal power as well (please refer to chapter “Dual heating and Trigger signals for dosing sys-
tem without saving”).
fig.6236B