Electrolux Professional Clarus Vibe WH6-11, Руководство по установке

Страница: 7 / 48

Installation manual
7
In case several machines are managed by the same operator the repetitive movements will increase and as a conse-
quence of this the related biomechanical risk will increase exponentially.
Follow the below recommendations to avoid, as much as possible, operators acquiring bodily injury.
• The models WH6-14, WH6-20, WH6-27 and WH6-33 should be connected to automatic dosing of chemicals or
equipped with detergent dosing dispenser on the front.
• For the models WH6-7, WH6-8 and WH6-11 the possible postural risks are the interaction with the door handle in
case the machine is not placed on a base. Place the machine on a base instead of directly on the floor so that the
operator does not need to bend his/her back unnecessarily when loading and unloading.
Minimum suggested height of bases is 300 mm.
• The hand force needed to open and close the washing machine door can be perceived too high the first times the
machine is used due to the initial high gasket pressure. Therefore, it is recommended not to use only the fingers
but also the palm when closing and opening the door. The gasket pressure will be lower after some days of use.
• Make sure there are suitable trolleys or baskets for loading, unloading and transportation.
• Organize job rotation in the working place in the case several machines are managed by the same operator.
1.4 Symbols
Caution
Caution, high voltage
Read the instructions before using the machine