Electrohome VistaGRAPHX 10K, Руководство пользователя

Страница: 64 / 127

Downloaded from Projector.com
23(5$7,21
9LVWD
*5$3+;
#43 . # 8VHU * V # 0DQXDO
6069
'LVSOD\ # 6OLGHEDUV
Enter a checkmark to superimpose a slidebar over the current image when an
adjustable parameter is selected directly. These slidebars include volume,
contrast, brightness, position, pixel tracking and phase, and others. If unchecked,
these slidebars (or any from
)XQF codes) will be hidden during adjustment.
'LVSOD\ # (UURU # 0HVVDJHV
Enter a checkmark to see on-screen messages indicating errors as they occur. See
3.9, Error Messages.
/DPS # 7LPHU # 0HVVDJH
Enter a checkmark if you want a lamp timer message to appear for a moment
when the lamp in the projector reaches its 1000-hour life. Once it appears, the
lamp timer message will time-out (disappear from screen) after 30 seconds.
NOTE: For maximum lamp performance and safety, it is recommended that
display of this message remain enabled — enter a checkmark.
9LGHR # 7HUPLQDWLRQ
Enter a checkmark to terminate the video input (75
6
).
The input should be
terminated unless the signal loops through (continues) to another projector or
display device, in which case the last projector in the chain should be terminated.
$XWR # 3RZHU # 8S
Enter a checkmark to enable the projector to automatically power up after a
power failure. Note that unsaved display adjustments may be lost.
,QWHOOLJHQW # /HQV # 6\VWHP
   
Enter a checkmark to enable Vista
GRAPHX
Intelligent Lens System
®
functions.
With any subsequent channel changes, the projector will automatically return to
the zoom, focus and lens offsets previously set for each channel.
NOTE: If you ever need to abort an ILS

function (such as a focus adjustment)
during a switch from one channel to another, press )XQF from presentation
level. All lens movements in progress will immediately stop.
This primarily read-only menu (Figure 3-16 and Figure 3-17) consists of four
separate read-only menus plus a text editing box used for entering the serial
number of a new lamp. The four menus list a variety of details about the standard
and optional components currently in use on the projector. Refer to these menus
for information about hardware and software versions installed, number of lamp
hours logged in total and for the current rental period, and projector model and
serial number. In addition, the Status Menu identifies the current channel,
switcher, slot and frequencies present. Use the Status menu whenever you install
a new lamp assembly.
6WDWXV
ö