Electrohome VistaGRAPHX 10K, Руководство пользователя

Страница: 16 / 127

Downloaded from Projector.com
,167$//$7,21 #)# 6(783
9LVWD
*5$3+;
#43 . # 8VHU * V # 0DQXDO
5045
The table or cart should be reasonably level. Fine adjustments to the projector
level can be made by adjusting the height of the projector legs; refer to 2.7,
Leveling for details.
6SHFLDO # 0RXQWLQJ
Note that Vista
GRAPHX
10K can be rotated and mounted at any vertical angle-i.e.,
you can tilt the projector forwards or backwards as much as desired for your
application. The side-to-side tilt, however must not exceed 15° (see Figure 2-10).
This limit ensures that the arc lamp in the projector operates properly and safely.
Always make sure that exhaust air from the projector does not vent towards the
lens, otherwise you may detect heat waves in your projected image.
)LJXUH #50431# 9HUWLFDO # DQG # +RUL]RQWDO # 7LOW # 5DQJHV
You must use an Electrohome ceiling mount fixture if the projector is to be
inverted and suspended. For more information, contact your dealer.
In rear screen applications where space
behind the projector is limited, a mirror
may be used to fold the optical path. See
Figure 2-11. The position of the projector
and mirror must be accurately set — if
considering this type of installation, call
your dealer for assistance.
The front panel of the projector has two standard input panels to which you may
connect a variety of sources. The upper right panel (Input 1) accepts an RGB
input from an external RGB source with audio follow-through. The lower left
panel (if video decoder module is installed) accepts composite video (Input 3) or
S-video (Input 4) and audio from devices such as video tape or disk players.
There are also several optional interfaces available for connecting other sources
(Input 2). Such an option installs in the upper left panel. See Figure 2-12.
)ROGHG # 2SWLFV
ö
)LJXUH #50441# )ROGHG # 2SWLFV
517 6RXUFH
&RQQHFWLRQV