Electrohome VistaGRAPHX 10K, Руководство пользователя

Страница: 37 / 127

Downloaded from Projector.com
23(5$7,21
9LVWD
*5$3+;
#;3343 . HU * V # 0DQXDO
60<
NOTE: ([LW does not save changes within text editing boxes or pull-down lists.
$UURZ # .H\V
Use the 21
or
2)) keys to navigate within a menu or pull-down list or to
increase or decrease the value in the second (bottom) slidebar of a double
slidebar. Use
or
to change all other slidebar values — hold as desired
for continuous scrolling. Also use or to jump between “pages” in a
long pull-down list.
Use 21 or 2)) in conjunction with certain toggle keys—those labeled with an
asterisk—to ensure a toggle only in the desired direction. When turning the
projector on, for instance, you may be too far from the projector to know
whether it is really off or if the shutter is just closed. If you press
3RZHU -
and
simply hold it for a second or two in hopes of turning the projector on, the
projector will turn off if the projector is actually already on. Instead, to avoid the
risk of toggling in the wrong direction, quickly press and release the function
key you wish to toggle (in this case
3RZHU - ). Then immediately (within 2 seconds)
press either 21 or 2)) as desired. The specific toggle will occur.
Toggle keys are labeled with an asterisk on the keypad. They are listed below:
•
6KXWWHU -
+
21 = close the shutter (dowser)
6KXWWHU - +
2))
= open the shutter (dowser)
•
6WE\ - + 21 = put the projector in standby mode
6WE\ -
+
2))
= leave standby
•
3RZHU -
+
21
= turn the projector on
3RZHU -
+
2)) = turn the projector off
•
0XWH - + 21 = turn the audio on
0XWH - + 2)) = turn the audio off
•
26' - + 21 = turn the menu system on
26' - + 2))
= turn the menu system off
&RORU
Press &RORU to adjust the color saturation level, or the amount of color in a video
image. Lower settings produce less saturated colors — a setting of “0” produces
a black and white image, for example. If the color level is too high, colors will be
overpowering and unrealistic. Use
and until the desired color
saturation level is displayed.
7LQW
Press 7LQW to adjust the red/green color hue for true color reproduction of NTSC
video signals. For best results, adjust tint while displaying a proper test pattern
— otherwise, it is recommended that tint remain at its default setting. Use
and
until the desired tint is displayed.
'HWDLO
Press 'HWDLO to adjust the sharpness of a video image. Use and until the
display is as sharp as desired, keeping in mind that any level of detail above 50%
21
2))
21
or
#
2))
&RORU
7LQW
'HWDLO