Electrohome VistaGRAPHX 10K, Руководство пользователя

Страница: 62 / 127

Downloaded from Projector.com
23(5$7,21
9LVWD
*5$3+;
#43 . # 8VHU * V # 0DQXDO
6067
controlling two protectors in the same area and want to work with one projector
at a time.
Note that if you change a protocol for either sensor to anything other than Off,
the protocol for the other sensor also changes. For example, setting the Front IR
Keypad option to Vista D also changes the Rear IR Keypad to Vista D. If you
want only one sensor to respond to a particular protocol —Vista C, Vista D, or
Vista All — disable the other sensor by setting its protocol to Off.
,03257$17
<RX # FDQ # GLVDEOH # WKH # FXUUHQW # ,5 # NH\SDG 1
.HHS # DW # ´ $OO # 9LVWD µ # XQWLO # \RX # DUH # VXUH # RI
WKH # FXUUHQW # ,5 # SURWRFRO 1
NOTES: 1) Vista
GRAPH
X IR keypads are set at manufacture to "Protocol C". See
2.10, Keypad Protocols for information about changing the keypad protocol. 2)
VistaGRAPHX IR keypads do not use Vista A or Vista B. Use Vista A or Vista B
only if you are using an IR keypad supplied with a VistaPro projector.
:LUHG # .H\SDG
Like the IR remote, the optional wired keypad is either a "Protocol C" keypad
(default) or a "Protocol D" keypad. Likewise, the projector can be set to accept
wired keypad data accordingly, responding to Vista C, Vista D, or All Vista. If
desired, you can prohibit the projector from responding to a particular wired
keypad protocol, or you can ensure that the projector responds to either protocol
(default). You can also prevent the projector from responding to the keypad
entirely. In the pull-down list, select one of the following protocols for the
projector:
NOTES: 1) Vista
GRAPH
X wired keypads are set at manufacture to "Protocol C".
See 2.10, Keypad Protocols for information about changing the keypad protocol.
2) VistaGRAPHX wired keypads do not use Vista A or Vista B. Use Vista A or
Vista B only if you are using a wired keypad supplied with a VistaPro projector.
%URDGFDVW # .H\V
Enter a checkmark if you want keypad commands sent to one projector to be
relayed to all projectors in a network. Note the
key will still allow you to
control a specific projector when necessary.
3URMHFWRU #&
Enter a three-digit number (such as "000") to assign a number to the
projector currently in use. Numerical identity for projectors is
required whenever you want to communicate with a single projector within a
multiple-projector application (see
key, above). If you make a mistake,
press ([LW to cancel.
For more information about controlling multiple projectors, see Section 3.8.
Use the checkboxes and pull-down lists in this menu to alter how the projector
responds to commands and displays parameters. Refer to the "Using Slidebars
3UHIHUHQFHV
ö