Electrohome VistaGRAPHX 10K, Руководство пользователя

Страница: 39 / 127

Downloaded from Projector.com
23(5$7,21
9LVWD
*5$3+;
#;3343 . HU * V # 0DQXDO
6044
to shift the image up or down. Use and to zoom in and out (requires
zoom lens) or to shift the image slightly left or right. Note zoom range is 3-97.
6KXWWHU
Press and hold 6KXWWHU - for a second or two to toggle the mechanical lens shutter
(dowser) closed or open with a single key press. Or quickly press and release
6KXWWHU - and follow immediately with 21 or 2))
if you want to guarantee the
correct toggle (useful if you are unsure of the present status). Close the shutter
whenever you want to mute all display yet maintain access to all projector
functions. Open the shutter to regain the display.
NOTES: 1) Like standby, closing the shutter automatically reduces internal light
to a minimum so that heat doesn’t build up inside the projector. 2) The status of
the shutter is shown in the LCD window on the rear panel of the projector.
0XWH
Press and hold 0XWH - for a second or two to toggle the audio on or off with a
single key press. Or quickly press and release 0XWH - and follow immediately with
21 or 2))
if you want to guarantee the correct toggle (useful if you are unsure
of the present status).
)XQFWLRQ # .H\
From presentation level, press )XQF followed by a 2-digit number to access any of
the projector’s resident test patterns. For example, )XQF
will display a 128-
step grayscale pattern, or )XQF will display a scrollable list. A list of test
common pattern codes appears on the back of the IR remote keypad and in the
Service subsection later in this manual.
You can also use )XQF followed by a special 2-digit number to directly access
certain options in the Size / Position or Image Settings menus — this will enable
a second method for adjusting the option immediately, without going through the
menu system. For example, to toggle the VCR option: press
)XQF ; to stop an
ILS

adjustment immediately: press )XQF
.
To broadcast to all projectors in a network, press )XQF .
NOTES: 1) Once )XQF is pressed in presentation level, the projector will not
respond to non-numeric entry until 2 digits have been entered or until 5 seconds
of inactivity have elapsed. 2) Certain engineering codes will freeze an image or
display an unfamiliar menu or image. Should you accidentally select one of
these special codes after pressing
)XQF , press ([LW
to cancel the function and
return to presentation level.
26' #+ 2Q 0 VFUHHQ # GLVSOD\ ,
Press and hold 26' - for a second or two to toggle menus and test patterns on or
off (i.e., visible or invisible). Or press 26' - followed immediately by 21 or
2))
to guarantee the correct toggle direction (useful if you are unsure of the
present status). Note that invisible menus are fully functional.
6KXWWHU -
#
0XWH -
)XQF
26' -
#