ELECTRO FREEZE Soft Serve Model SL500
184599
29
11
Routine Maintenance
DAILY
1. Disassemble, wash, rinse,
sanitize, air dry, reassemble and sanitize
all parts which come into contact with the
mix.
CAUTION
To prevent bacteria growth,
remove all O-rings when
cleaning. Failure to do so
could create a health hazard.
2. Clean the cylinder and drain tube
with the appropriate brushes.
3. Upon cleaning, inspect and
lubricate all seals and O-rings as in-
structed that come into contact with mix.
Replace any O-ring that is worn, torn, or
loose-fitting.
4. Wipe all exterior surfaces of the
freezer to remove any splattered mix.
5. Check overrun and temperature
of the product.
Electro Freeze recommends the following schedule to help maintain your freezer in
like-new operating condition. Take the time to learn and perform these routine
procedures and receive in return many years of valuable service from your freezer.
Protect your investment!
WEEKLY
1. Carefully inspect all parts for
wear, including seals, o-rings, and
blades. Replace as required.
Replace blades if worn 3/16 (5mm) or
more.
2. Check the beater tangs and drive
shaft for wear.
A worn coupling will have a nonparallel
shape on the drive opening.
1500 HOURS
OF OPERATION
1.
Gear Reducer - Initial Oil Change
Have the oil in the gear reducer changed
by your Electro Freeze Distributor.
