2
184599
ELECTRO FREEZE Soft Serve Model SL500
2.1
Uncrating and Inspection
Figure 2-1 Machine bolted to Shipping Base
CAUTION
Be sure to properly
support the machine when
removing bolts and
installing legs or casters.
When the unit is received and while
the carrier is still present, inspect the
shipping carton for any damage that
may have occurred in transit. If the
SHOCKWATCH
®
label indicates red and/or
the carton is broken, torn, or punctured,
note the damage on the carrier’s freight
bill and notify the carrier’s local agent
immediately.
1. Remove the carton from the pallet,
and move the machine as close as
possible to the permanent location.
2. Remove the shipping bolts on the
bottom of the freezer (figure 2-1) and install
either the legs or casters (figure 2-2).
Figure 2-2 Installing Mounting Legs or Casters
NOTE:
Screw casters
or legs all the way in
coupling, then adjust
to level side to side
with a 1/4” slope to
the front.
