INSTALLATION
Eas yTrack
Version: 2004/06/17
Page 9
2.1.3 Optional Accessories
If your PC has no serial interface (RS232), but a USB
interface, you may realize the connection to
EasyTrack also via a USB converter.
• USB converter
including serial cable, adapter and driver CD
Order no.
9520
2.2 Insertion of SIM card
Use a normal 3V or 5V SIM card for mobile phones
Before installing EasyTrack, the SIM card must be
inserted into the device. For this purpose, open the 4
screws at the front side of the device.
Pull the circuit board out of its enclosure. Afterwards insert
the SIM card you received from the service supplier with its
beveled edge at the correct position into the device (see fig.
1). If you have received a check card format SIM card,
please remove the smaller section.
In order to avoid any destruction of EasyTrack, the
device must be switched off!
To reduce the risk of damaged equipment. Before any
part of the circuit board is touched be sure to discharge
yourself by touching a grounded surface of the device!
figure 1; insert SIM card
