EASYTRACK MANAGER
Eas yTrack
Version: 2004/06/17
Page 22
4.7.3.1 PC Port
After the first start of the EasyTrack Manager, the
application is not connected automatically to a COM
port. The user has to define, which COM port shall be
used by the application. After the definition of the COM
port, press the appropriate
Connect
button to connect
the COM port to the EasyTrack (see ) or the GSM
office modem (see ). If a connection has been
established, the appropriate button text is switched to
Disconnect
. All COM ports are closed automatically if
the application is closed.
4.7.3.2 Language
In the field
Language
one of two national languages
(English and German) can be chosen to be used by the
application for the text display and file entries.
4.7.3.3
Office Modem (GSM)
The GSM modem is a GSM900/1800/1900 Phase II+
device. 1900MHz band is used in North America; see
checkbox
1900MHz
.
PIN
Depending on the type of your SIM card, it may be
protected against misuse by a four- to eight-digit PIN.
If required, enter the according PIN, which is stored
on the SIM card, into the input field. If no pin is
required, select the checkbox
automatic
If the wrong PIN is transmitted to the office
modem three times, the SIM card will be
blocked.
At
the
same
time,
the
EasyTrack Manger opens a dialog box for the
entry of the PUK and PIN.
figure 9; PUK dialog
save
If the check box (displaying options) is activated, the
PIN in the edit field will be saved into the INI file.
SMSC address:
Please enter the phone number of the service center
in the manner described by the network operator.
Enter the SMSC address with the international
access cha
