EASYTRACK MANAGER
Eas yTrack
Version: 2004/06/17
Page 16
4.4 First Steps
figure 3; front view
•
Make sure that your PC and the EasyTrack are
switched off.
•
Connect your EasyTrack to the main power supply
connector
and have a look on the LEDs to
check the proper operation of EasyTrack. Directly
after power-up, both LEDs flash quickly for the
period of 5 seconds. Afterwards, the green LED
indicates the hardware status, while the yellow
LED indicates the communication status with the
GSM modem. The green LED flashes slowly
(1 s on/1 s off) if everything is in order.
•
Plug one end of the null modem cable supplied into the
appropriate port of the EasyTrack and the other end
into a free serial port (e.g. COM1 or COM2) on your PC.
•
Plug the antenna connector for GPS into port .
•
Plug the antenna connector for GSM into port .
•
Switch the computer on and follow the instructions of the
chapter:
Installation
