EASYTRACK MANAGER
Eas yTrack
Version: 2004/06/17
Page 27
•
General Data
The fields within the group
General Data
must be
indicated to ensure the faultless functioning of
EasyTrack.
ID number
In the field ID number a name with 15 characters
at most must be specified, through which you
may identify the corresponding device if
EasyTrack sends an SMS to the office modem.
Modem PIN
Depending on the type of your SIM card, it may
be protected against misuse by a four-digit PIN.
If required, enter the according PIN, which is
stored on the SIM card, into the input field. If no
pin is required, select the checkbox
automatic
.
If the wrong PIN is transmitted to the GSM
modem three times, the SIM card will be
blocked. In this case, extract the SIM card
from the EasyTrack and insert it into a GSM
mobile phone. Via the mobile phone, the
PUK and PIN, which are now required, can
be entered.
automatic
( Checkbox )
see
Modem PIN
GSM 1900 MHz
( checkbox )
The default setting of the GSM modem is for
900/1800MHz band. For PCS operation (1900MHz) you
need to change the band.
Do the following steps to change the band settings:
1) activate the checkbox
1900MHz
2) use the button
Upload of Data
to apply the data
to EasyTrack and GSM modem
3) follow the instructions of EasyTrack Manager,
then remove the power supply of the EasyTrack
for about 5 seconds to apply the change
4) reconnected the EasyTrack and wait for it to be
responding again to the EasyTrack Manger.
SMSC address
enter the phone number of the service center
(SMSC =>
Short Message Service Center) in the manner as
described by the network operator. Enter the SMSC
address with the international access cha (e.g.
+15149931123
).
SMS destination
Please enter the phone number to which EasyTrack
shall send the messages. Enter the phone number with
the international access cha .
