INSTALLATION
Eas yTrack
Version: 2004/06/17
Page 10
2.3 Installation position and fastening
The device is contained in a small box, which may be
attached to a surface using 4 screws at the fastening
points.
The device has neither a keyboard nor a display and
can therefore be installed in a concealed position.
As to the installation of EasyTrack, any installation
position is allowed, as long as you choose a dry
place where no person can be injured.
Be sure the cables are tied closely to the easy track
to prevent excessive vibrating of the cables, and
possible damage to the connectors.
Do not install the cables in such a way that they are
tight or strained, allow some slack to avoid potential
cable damage
Windows
®,
Windows NT
®
and Microsoft
®
are registered trademarks of
Microsoft Corp.
2.4 Connection options
Digital Inputs (9…36V):
Connect the positive line to (a) and the ground to (b)
Signals with the same name are already connected inside
the EasyTrack.
purple
POWER & I/O
(9...36V)
(9...36V)
Dig. In 1 (a)
Dig. In 1 (b)
Dig. In 2 (a)
Dig. In 2 (b)
Dig. In 3 (a)
Dig. In 3 (b)
V-PULSE Input
RPM-PULSE Input
Supply GND
Supply GND
view to the solder
side of the
cable connector
red
black
orange
blue
yellow
grey
green
pink
brown
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
