ELCOM Uniq 150, Руководство по обслуживанию, Страница: 23 / 41

38
Elcom, spoločnosť s ručením obmedzeným, Prešov Elcom, spoločnosť s ručením obmedzeným, Prešov
39
Uniq 150 Service manual Service manual Uniq 150
Figure 2.16. – Installation and interconnection of audio connector
AUDIO1 connector on mainboard
Soldering of audio connector:
Screw M3 × 4 mm DIN7985A
Audio connector 3,5mm F on panel
Audio connector holder of UniqPC
Connectors cover (with cut corner)
Cable 8-pin 250 mm 2H
Needed to order Quantity Ord. code
Connector Jack 3,5mm F on panel 1 M190238
Cable 8-pin 250 mm 2H ½ M200128
Tubing 2,4 mm 30 mm M010004
Audio connector holder of UniqPC 1 M051112
2.17. Installation and interconnection of PS2 connector
1. Four-wired cable lead through adjusted cover or under the extended connectors holder by connectors. For Tx
execution is the cable lead out with the other cables of particular lenght.
2. Solder PS2 connector on 4-wires cable.
3. Put out the wires from 6-wires cable, which will not soldered.
4. Put 4 pieces of tubing long at least 10 mm on remaining wires.
5. Put 1 piece of thick tubing long at least 20 mm on 4-wires cable with PS2 connector.
6. Solder both cables and soldered places cover with the thin tubing.
7. With thick tubing cover all wires together.
8. Plug the cable to connector KB_MS1 (KB/MS1) on mainboard.
9. Catch the PS2 cable to cable holder.
Figure 2.17. – Installation and interconnection of PS2 connektor
Font view
1
3
5
2
4
6
mini din
1
6-pin connector

about 1,2 m

Rear view
2
4
1
3
5 6
Adjusted connectors cover.
Needed to order Quantity Ord. code
Cable 4-wires 1,2 m M200161
Connector mini din 1 M190116
Cable with connector 6-pin. 1 M200168
Tubing 1,6 × 10 mm 4 M010003
Tubing 3,2 × 20 mm 1 M010006
2.18. Interconnection of extended USB connectors
Extended USB connector could be installed only to Tx execution.
1. Cable with 8-pins connector split to half and put tubing on its wires. It can happen, that the Uniq already consists of
such cable with free wires to USB connection..
2. Cut out the USB AM (male) connector of the USB cable.
3. The half of 8-pins cable and USB kábla with USB AF (female) connector solder together.
4. Soldered places cover with tubing.
Figure 2.18. – Interconnection of extended USB connectors
8 – black
6 – green
4 – white
2 – red
1 – black
3 – green
5 – white
7 – red
1
shielding