4
PISCES
MINIFILL
3.0
Technical Data & Dimensions
Technical Data
Cold Fill Pressure
Min
Max
MECHANICAL
M1/1
0.8bar
3.0bar
Minimum Mains Cold Water Supply
12 ltrs/min
Power Supply (240V, 50Hz)
Motor Rated Fuse Required
10 Amps
Start Current
9.0 Amps
Full Load Current
2.8 Amps
Break Tank Air Gap
AF
Break Tank Capacity (Max)
7.6 Ltrs
Weight (Empty)
M1/1
(Filled)
M1/1
Connections
22.0 kg
30.0 kg
Mains Cold Water Inlet (A)
15mm BSP
Waste water Outlet/Overflow (B)
28mm COMP
Water Outlet (C)
15mm COMP
Electrical Cable Glands (D)
3 x 10mm
4.0
Delivery Consignment / Unpacking
The Pisces Minifill pressurisation manager is delivered as a single carton containing the Pisces Minifill and associated fittings.
The Pisces Minifill unit carton contains:-
•
Assembled and Tested Pisces Minifill unit.
•
Wall mounting bracket. (Supplied attached to the front of the water tank.)
•
Installation Template (part of the carton).
To unpack the Pisces Minifill pressurisation manager, carefully cut along the taped seams of the carton. The carton will then
un-fold to reveal the unit. Do not discard of the packaging as this can be used as a template to assist with the installation of the
unit
5.0
Locating the Pisces Minifill
The Pisces Minifill pressurisation manager is not suitable for installation external to a building. The position chosen for the
appliance shall be a structurally sound wall capable of supporting the filled weight of the appliance and all associated
ancillary equipment. The wall shall be truly plumb vertical to ensure correct operation.
View
Side View (Left)
