5
MECHANICAL M1/1
6.0
Installation Clearances
PISCES
MINIFILL
For ease of installation, commissioning, servicing and maintenance the following clearances should be observed.
NOTE: These distances are MINIMUM and MUST NOT be reduced. Failure to observe these
clearances could result in the warranties on the appliance becoming VOID.
7.0
Wall Mounting
The Pisces Minifill pressurisation manager can be floor
mounted, however it is recommended to be wall mounted, via
the wall-mounting bracket supplied. This bracket interlocks
into the cutout on the rear of the appliance.
A template, detailing the fixing positions and clearances, is
printed onto the appliance packaging, cut along the dotted
lines and position the template in the desired location to
ensure that all minimum clearances can be achieved.
The wall-mounting bracket should be securely fixed to the
wall using suitable fixings for the wall construction and
appliance filled weight. The wall-mounting bracket positioning
detail is shown in fig 7.
The Pisces Minifill pressurisation manager should be carefully
lifted so that the cutout on the rear of the Pisces Minifill
unit is just above the mounting bracket, and then gently
lowered to engage the bracket into the cutout.
DO NOT
lift the
Pisces Minifill unit by any of the internal parts or components.
Important Notice
When viewed from the side, the North / South axis of the
Pisces Minifill unit must be vertical
Fig 7
