elco Aquatop TC Series, Руководство по эксплуатации, Страница: 7 / 48

7
Installation and Connection Instructions
Transport and Setup
Transport
Before every transport, make sure the
lifting or transport equipment has the
lifting power needed to transport the
respective equipment weight. All of the
tasks described here must be carried
out based on the relevant safety
standards. This applies to tasks as-
sociated with the equipment as well as
the process or procedure of each task
itself.
Transport with Forklifts, Lifting
Platform or Similar Equipment
Insert forks lengthwise under the
wooden pallet.
When lifting, make sure the weight is
equally distributed. Never tilt the heat
pump beyond max. 30
º
(in any direction)
when transporting it. Avoid exposing
the heat pump to any type of moisture
or humidity.
(Also applies to setup and installation!)
Never stack objects on the heat pump or
hang up wet clothes over it.
Setup
The heat pump is designed to be set
up in an interior location (IPXO, i.e.
only dry rooms). The base frame must
be set up on a smooth, level, and plane
surface.
The heat pump must be setup in a way
that allows servicing the pump without
access problems. This is ensured
when complying with the wall
clearances depicted below.
Control station
Plan view with min. clearances
After moving the unit to the installation
location, remove the transport
protection and safety elements and
attach the vibration dampening rubber
pads included with the equipment into
the now exposed threaded openings
at the bottom of the unit.
These pads are also adjustable to
ensure the heat pump is level.