elco Aquatop TC Series, Руководство по эксплуатации, Страница: 22 / 48

22
Initial Startup
Quickstart
LOGON B RVS51.843, Control Elements
Control Units
Control Panel AVS37.294/309
Control unit installation variations:
Snapped into HP front panel (interior
HP setup) or inside the building, with
the help of the wall mounting plate,
attached to wall (exterior HP setup).
Room Controllers QAA75...
QAA75.611 /301:
Room controller, wired.
Operating Options
Using control panel "plain text"
(Additional room controller optional)
A Basic
unit RVS...
C Room controller QAA75...
D Exterior temp. sensor AVS13...
E Control panel AVS37.294 (plain text)
The room controller should be placed
in the primary occupancy room after
considering the following items:
•
Select the placement location in
such a way that the sensor is able
to obtain accurate room temperature
readings and is not affected by
direct sunlight or another heat or
cold source (approx. 1.5 above
floor level).
•
When mounting to wall, there
must be sufficient room to slide unit
in and out.
If the unit is removed from its base, it is
no longer functional.
Select potable water operation
Select heating operation
Display information
Apply setting
Reset / defrost key
Exit setting
Service plug (BSB)
Cooling key
Adjust room comfort setpoint
Navigation and settings
Select heating operation
Select potable water operation
Exit setting
Apply setting
Adjust room comfort setpoint
Navigation and settings
Presence key
Cooling key
Display information