elco Aquatop TC Series, Руководство по эксплуатации, Страница: 5 / 48

5
Basic Information
Legal Guidelines, Rules,
Warranty Terms,
Receiving Inspection
General Information
These operating instructions serve the
correct installation, adjustment, and
maintenance of the equipment.
The following information must there-
fore be read carefully and the heat
pump must be installed, inspected, and
maintained by correspondingly trained
technicians.
The manufacturer is not liable for
mechanical, hydraulic, or electrical
modifications after the warranty
expires. The warranty becomes null
and void in case of not explicitly
authorized actions carried out contrary
to or in violation of these operating
instructions.
All applicable safety standards must
be observed during installation. Check
whether the properties of the power
supply system match those of the heat
pump (type plate).
These operating instructions and the
electrical scheme (diagram) of the heat
pump must be stored carefully and
made available to the operating per-
sonnel if needed.
E
The manufacturer is not liable for per-
sonal injury or property damage, direct
or indirect, caused by noncompliance
with these instructions.
The equipment may be opened only
by qualified personnel.
Legal Guidelines and Rules
All guidelines based on CE standards
were observed during design and
manufacture of the heat pump.
(See CE Conformity Declaration.)
Compliance with the corresponding
SEV, EN, and IEC standards is
required for the electrical connection
of the heat pump. The connection
specifications of the local utility or
electric company must be complied
with as well.
E
Explanations Concerning Our
Warranty Terms
Our warranty does not cover damages
caused by or due to the following
reasons:
-
Unsuitable or improper use or
operation,
- Incorrect setup, adjustment, or
incorrect initial startup by buyer
or third parties
- Installation of third party parts
- Operating the equipment under
overpressure or in excess of the
specifications indicated by the
factory
- Noncompliance with the notes
and information of the operating
instructions
The heat pumps have a warranty
period of 24 months after the day of
delivery. The sales, delivery, and
warranty terms and conditions ac-
cording to the order confirmation apply
in all other instances.
Receiving Inspection
The equipment is shipped on a
wooden pallet and a corresponding
protective cover.
The equipment must be checked for
completeness and transport damage
upon receipt.
E
If damages are detected, the corre-
sponding damage must be noted
immediately on the shipping document
and identified with the following
phrase: "Conditional acceptance due
to obvious damage."