ELBO CONTROLLI E236+, Инструкция по установке, эксплуатации и обслуживанию

Страница: 61 / 71

11. TD236+ SOFTWARE ELBO CONTROLLI srl
Preset E236+
61
Moving the tool chart on to another machine
Through this function it is possible to change the machine of the tool chart selected. The tool correction
values will be edited in accordance with the difference between the machine of origin and that of
destination.
Once the machine chooses the destination it will indicate
the difference in measures between the two origins and it
will necessary to confirm the operation requested:
Save
Carry out the saving of the tool offset in the specific language of the numeric control. This file must be
successively transferred on to the numeric control to update the correction values
It will be necessary to specify the file name and eventually choose a different way of that predefined for
the machine in use.
11.4 CONFIGURATION AND RESTORING DATA
Configure
The configuration menu allows you to edit the interface language of the software: select the language
desired from the ones available:
þ
The settings will have an effect on the successive restarts of the software.
Through the configuration icon it is furthermore possible to restore the data (machine origins and tool
charts) of a previous saving.
Td236+ automatically creates a data backup copy of each operation of importation/exportation, overwriting
the previous ones. In this way, only the last daily backup is available, but they are kept in the archive for
the last 15 days.