ELBO CONTROLLI E236+, Инструкция по установке, эксплуатации и обслуживанию

Страница: 31 / 71

8. HOW TO USE THE INSTRUMENT ELBO CONTROLLI srl
Preset E236+
31
8.2 HOW TO SELECT RADIUS / DIAMETER
Select the “display settings” menu, by pressing the icon, then press
alternatively the selection icon Radius/Diameter to see the dimension in X
changing in both ways
The dimension shown is the radius of the measured tool.
The dimension shown is the diameter of the measured tool.
At the top right of the screen, is indicated the mode in use.
To exit the “display settings” menu press the icon .
þ
The settings of the function “radius” or “diameter” are automatically
saved and reactivated at the next switch on.
8.3 HOW TO SELECT MM / INCH
Select the “display settings “menu by pressing the icon, then press
alternatively the icon mm/inch to see the dimensions changing in
both ways.
The value shown is in millimetres; three decimal places are
displayed
radius
The red bar indicates that
the machine origin doesn’t
correspond with the mode
selected
mm.