ELBO CONTROLLI E236+, Инструкция по установке, эксплуатации и обслуживанию

Страница: 45 / 71

9. MACHINE ORIGINS ELBO CONTROLLI srl
Preset E236+
45
E.g.
Confirm the dimension with the icon .
The set dimensions are shown beside their respective icons.
E236+ allows the acquisition of the machine origins whether in auto-
collimation mode or through the use of the fixed reticule. As illustrated in
the para.7.3, for a higher precision of the measure it’s advisable to memorize
the machine origins using the fixed reticule and measuring at the centre of
the screen.
Frame the tool or resetting gauge, find the best collimation (best focus + best
tangency, see para 7.2), then press the confirm icon
e
to acquire the dimensions.
As soon as the dimensions are saved, the offset is activated and shown in
the X and Z fields. The axis measurement should match the values entered
for the resetting gauge. If the dimensions don’t match it’s possible to repeat
the procedure.
At the end press , you will be asked to save the modified data:
Press the icon the new origin will be saved, and the display will
show the machine origin just created as active. If the axes have not been
moved after the calibration measurement, also the dimensions will coincide
with those defined.
In the centre of the screen will be shown the new list of machine origins that
are now available.