User Guide
Product: Evolis
Document REF: MIU-5100-C_Evolis Solution GB elancity
Page
18
/
42
Date: 02/09/2020
Confidential document, property of ELANCITY. All copies and transfers are unauthorized without prior consent.
5.1
I
CONS
SEND
your desired settings to the Evolis radar.
SAVE
the setting for future use (speed & messages settings must be saved as
separate files)
SEE
your new settings displayed on the Evolis radar screen
OPEN
a previously saved setting
RELOAD
the parameters of a previously recorded setting into the Evolis radar
5.2
T
HREE
-
COLOUR DISPLAY
The Evolis radar can display up to
3 colours
:
(Note : The factory setting uses two colours
only for the speed display: green and red.).
GREEN
for speeds
below
the speed limit
AMBER
for speeds
close to
the speed limit
RED
for speeds
above
the speed limit
* Amber activation:
To activate additional amber colour follow the directions below:
•
Ensure the control dial is set to ‘SP’
•
Go to Settings, select the check box “three-color display (green/amber/red).”
•
Then set the margins within which you wish the display in Amber in the ‘Colour
changing Speed Threshold’. i.e. in the example above, at 4mph before the display will
turn to RED.
•
Upload the new settings to the device by clicking the blue arrow.
•
Select the green tick to launch a display that will preview your selected settings.
