User Guide
Product: Evolis
Document REF: MIU-5100-C_Evolis Solution GB elancity
Page
17
/
42
Date: 02/09/2020
Confidential document, property of ELANCITY. All copies and transfers are unauthorized without prior consent.
•
Settings page
All of the programmable controls and thresholds are displayed on the “SETTINGS” page. The
displayed settings are those currently in the Evolis radar’s memory. To program or modify
these thresholds; select the desired setting(s), and then validate your choice by clicking the
blue arrow icon, which will send this information to the Evolis radar’s memory.
The message "Device configuration done" indicates that the set-up was completed correctly.
To save your new configuration for use at a later date, click the save icon:
‘SP’
: Remember, in order to modify the settings/thresholds via the ‘SETTINGS’ page, the
control dial inside the case of the device must be set to, and then remain, at SP. If the control
dial is set to any other setting, 70mph for example, then the settings you see on this page are
NOT active.
Speed
settings configurations can be
saved
to your desktop & can be imported
to the device at a later date. Re-configured text messages can be also be saved
but as a
separate
file, via the message page.
•
SPY MODE:
This option allows the radar to continue collecting traffic data as usual, but the motorist will
only see a blank radar screen. This allows you to test the radar’s efficiency by comparing the
traffic statistics recorded when the radar is ON against those when it is (seemingly) OFF.
•
STATISTICS:
Allows you to enable/disable the two-way traffic data recording.
