Ekra E1-II, Системное руководство

Страница: 54 / 116

Kapitel 5 Operation
5-6
©
EuroDok 05_Bedienen.fm
Druck 23.10.08
E1-II semiautomatic screen printer
System Manual
fon
+4
9 (0
) 625
2 -
6
9
5
0
1
fa
x
+4
9 (0
) 625
2 -
6
9
5
0
3
m
ai
l@
eu
ro
do
k.de
Eu
ro
Do
k G
m
b
H
D
a
rm
st
ädt
e
r St
raße
67
D-64
646
Heppe
nh
e
im
5.2 Explanation of the functions
Select the functions to perform or activate them manually.
5.2.1 Control
Used to switch the control unit on and off. If the status field is green, the
control unit is on. If it is red, the control unit is off. This function is used to
supply the individual assemblies of the printer with power.
i
Note!
The machine functions will only operate if the control unit is switched on.
5.2.2 Automatic / Manual
Used to start the automatic mode. If the status field is green, the automat-
ic mode is active.
If the status field flashes red, an error has occurred. Remove the unprint-
ed PCB.
5.2.3 Basic Position
This function moves the machine to its basic position. The basic position
is the initial position of the machine.
5.2.4 Transport
This function moves the PCB in and out.
5.2.5 Table up / down
This function moves the printing table to the printing position or inspec-
tion position. The status field is green when the table is at the printing po-
sition.
5.2.6 Print
This function operates in jogging mode. It starts a manual printing cycle
based on the set printing mode. If the printing cycle is active, the status
field flashes green.
The printing cycle can be interrupted as often as required by deactivating
the function. It is possible to abort the printing cycle by activating the BA-
SIC POSITION function.