Ekra E1-II, Системное руководство

Страница: 49 / 116

Kapitel 5 Operation
5-1
©
EuroDok 05_Bedienen.fm
Druck 23.10.08
E1-II semiautomatic screen printer
System Manual
fon
+4
9 (0
) 625
2 -
6
9
5
0
1
fa
x
+4
9 (0
) 625
2 -
6
9
5
0
3
m
ai
l@
eu
ro
do
k.de
Eu
ro
Do
k G
m
b
H
D
a
rm
st
ädt
e
r St
raße
67
D-64
646
Heppe
nh
e
im
5 Operation
5.1 General
• Automatic mode can only be started with the foot switch.
• If the foot switch is down, the vacuum is switched in. When the foot
foot switch is down again, the printing table moves into the printer
and the printing process begins.
5.1.1 Setting the pneumatics
i
Note!
It may be the case that different settings produce better results for your
application.
DANGER!
Do not set the screen clamping to a higher figure than 0,4 MPa.
•
Otherwise the clamping cylinders may be severely damaged.
DANGER!
Danger of crushing fingers!
Do not reach into the printer in the vicinity of the moving printing table.
5.1.2 Aligning the PCB
Requirement
• The machine must be ready
• The machine must be in its basic position