Ekra E1-II, Системное руководство

Страница: 17 / 116

Kapitel 1 Introduction
1-10
©
EuroDok 01_Einfuehrung.fm
Druck 23.10.08
E1-II semiautomatic screen printer
System Manual
fon
+4
9 (0
) 625
2 -
6
9
5
0
1
fa
x
+4
9 (0
) 625
2 -
6
9
5
0
3
m
ai
l@
eu
ro
do
k.de
Eu
ro
Do
k G
m
b
H
D
a
rm
st
ädt
e
r St
raße
67
D-64
646
Heppe
nh
e
im
1.12.4 Bypassing the locks
In certain situations, power must be supplied and the printer must be op-
erated while the side doors or covers are open (e.g. troubleshooting and
maintenance).
i
Note!
Locks may only be bypassed in compliance with all relevant safety regu-
lations by service personnel who have received special training in main-
taining the machine.
WARNING!
All of the safety devices must be fitted properly and function correctly before the
machine or system is started.
Safety devices may only be removed:
• if the machine is at rest and service work is to be carried out and
• if measures have been taken to ensure that the machine cannot be
started inadvertently.
1.12.5 Checking safety devices
• Front cover
‰
Start the machine while the cover is open.
⇒
The machine should not start.
1.12.6 Informal safety measures
• The machine should only be operated if all of the safety devices are
fully functional.
• In addition to the user’s manual, the generally applicable and local
accident prevention and environmental protection regulations must
also be made available and observed.
• All safety instructions and warnings on the machine must be kept in a
legible state.