Ekinex EK-SN2-TP-GAA, Руководство по применению

Страница: 29 / 29

Application manual
KNX standard wall presence detector with movement function EK-SN2-TP-
…
Rev. 1.0
– 29/09/2022
MAEKSN2TP_EN
© Ekinex S.p.A.
– All rights reserved
Pag. 29
Warning: Incorrect disposal of this product may cause serious damage to the
environment and human health.
Please be informed about the correct disposal procedures for waste collecting and
processing provided by local authorities.
22 General warnings

Installation, electrical connection, con
figuration and commissioning of the device can only be
carried out by quali
fied personnel in compliance with the applicable technical standards and laws
of the respective countries.

In case of tampering, the compliance with the essential requirements of the applicable directives,
for which the device has been certi
fied, is no longer guaranteed.

ekinex
®
KNX defective devices must be returned to the manufacturer at the following address:
EKINEX S.p.A. Via Novara 37, I-
28010 Vaprio d’Agogna (NO) Italy
23 Other information
This datasheet is aimed at installers, system integrators and planners
For further information on the product, please contact the ekinex® technical support at the e-mail
address:
support@ekinex.com or visit the website www.ekinex.com .
KNX
®
and ETS
®
are registered trademarks of KNX Association cvba, Brussels.
© EKINEX S.p.A. The company reserves the right to make changes to this documentation without notice.