Application manual
KNX standard wall presence detector with movement function EK-SN2-TP-
…
Rev. 1.0
– 29/09/2022
MAEKSN2TP_EN
© Ekinex S.p.A.
– All rights reserved
Pag. 18
14 List of ETS
®
parameters
The parameters available in ETS
®
are detailed in the next sections.
14.1 Menu: General
Figure 16 - General parameters window
Parameter name
Conditions
Values [Default]
Device type
-
Master
Slave
When the sensor is configured as master, all features are available; it can also receive the trigger signal
from one or more slave sensors for only one of the 4 output channels available.
When the sensor is configured as slave, it can only be used to extend the field of coverage for a master
sensor.
Input slave
Device type = Master
Light output C1
Light output C2
HVAC output C3
HVAC output C4
Assign the signal from the slave to one of the device channels.
Measured Lux value report
Disable
Enable
When enabled, the measured ambient brightness value in Lux is transmitted on the bus every 5 s.
Light control output C1
Device type = Master
Disable
Enable
Enable the control channel and show the respective group of parameters.
Light control output C2
Device type = Master
Disable
Enable
Enable the control channel and show the respective group of parameters.
