Application manual
Presence / movement sensors EK-DF2/DG2-TP
Rev. 1.2 - 2020-02-06
MAEKDF2DG2TP_EN
© Ekinex S.p.A.
– All rights reserved
Pag. 22
21 Disposal
At the end of its useful life the product described in this datasheet is classi
fied as
waste from electronic equipment in accordance with the European Directive
2002/96/EC (WEEE), and cannot be disposed together with the municipal
undi
fferentiated solid waste.
Warning: Incorrect disposal of this product may cause serious damage to the
environment and human health.
Please be informed about the correct disposal procedures for waste collecting and
processing provided by local authorities.
22
General warnings
•
Installation, electrical connection, con
figuration and commissioning of the device can only be
carried out by quali
fied personnel in compliance with the applicable technical standards and laws
of the respective countries.
•
In case of tampering, the compliance with the essential requirements of the applicable directives,
for which the device has been certi
fied, is no longer guaranteed.
•
ekinex® KNX defective devices must be returned to the manufacturer at the following address:
EKINEX S.p.A. Via Novara 37, I-2801
0 Vaprio d’Agogna (NO) Italy
23
Other information
This datasheet is aimed at installers, system integrators and planners
For further information on the product, please contact the ekinex® technical support at the e-mail
address:
or visit the website
KNX® and ETS® are registered trademarks of KNX Association cvba, Brussels.
© EKINEX S.p.A. The company reserves the right to make changes to this documentation without notice.
