Application manual
Presence / movement sensors EK-DF2/DG2-TP
Rev. 1.2 - 2020-02-06
MAEKDF2DG2TP_EN
© Ekinex S.p.A.
– All rights reserved
Pag. 9
EK-DF2-TP
EK-DG2-TP
When the device is installed in place, make sure that the shield is in the correct position according
to the required area masking
.
9
Installation
Warning!
The electrical connection of the device can be carried out only by qualified
personnel. The incorrect installation may result in electric shock or fire. Before
making the electrical connections, make sure the power supply has been turned o
ff
.
Warning! In order to supply the KNX bus lines use only KNX bus power supplies
(e.g. ekinex EK-AB1- TP or EK-AG1-TP). The use of other power supplies can
compromise the communication and damage the devices connected to the bus.
The device has degree of protection IP20, and is therefore suitable for use in a dry indoor
environment.
The device can be flush mounted through a
65 mm
(EK-DF2-TP) /
68
mm
(EK-DG2-TP) diameter
hole on a ceiling board with 5 mm to 25 mm thickness.
EK-DF2-TP
EK-DG2-TP
For solid ceilings, a plastic barrel-shaped plastic support for external mounting is available as an
accessory.