Chapter 5 Reference
Chapter 5 Reference
5-1. How To Attach the Optional Arm
An optional arm (or an optional stand) can be attached by removing the stand section.
Please refer to our web site for the corresponding optional arm (or optional stand).
http://www.eizo.com
Attention
When attaching an arm or stand, follow the instructions of their user’s manual.
When using another manufacturer’s arm or stand, confirm the following in advance and select one
conforming to the VESA standard.
- Clearance between the screw holes: 100 mm × 100 mm
- Thickness of plate: 2.6 mm
- Strong enough to support weight of the monitor unit (except the stand) and attachments such as cables.
When using an arm or stand, attach it to meet the following tilt angles of the monitor.
- Up 45 degrees, down 45 degrees (horizontal display, and vertical display rotated 90 degrees clockwise)
Connect the cables after attaching an arm.
Do not adjust the height of the stand removed from the monitor. When adjusted without attached
monitor, it causes the personnel injury or the damaged to the stand.
Since the monitor and arm are so heavy, dropping them may result in injury or equipment damage.
•
•
•
•
•
•
[Attachment Procedure]
1
Lay the LCD monitor on a soft cloth spread over on a stable
surface with the panel surface facing down.
2
Remove the stand. (Prepare a screwdriver.)
Unscrew the four screws securing the unit and the stand with the screwdriver.
3
Attach the monitor to the arm or stand.
Secure the monitor to the arm or stand using the screws specified in the user’s manual of the
arm or stand.
