0
Chapter 3 Adjustment and Settings
[Adjustment Procedure]
1
Perform the auto adjustment.
●
To adjust flickering, screen position, and screen size automatically
[Auto Adjustment]
Procedure
Choose <Screen> from the Adjustment menu, and press
.
Choose <Analog Adjustment> from the <Screen> menu, and press
.
Choose <Auto Adjustment>, and press
.
The auto adjustment function works (the message “In Progress” appears) to correctly adjust the
flickering, screen position, and screen size correctly.
When the auto adjustment is completed, a message appears. Select “OK” to confirm the new
settings or “Cancel” to restore the previous settings, and press .
Note
This function works correctly when an image is fully displayed over the Windows or Macintosh
display area. It does not work properly when an image is displayed only on a part of the screen
(command prompt window, for example) or when a black background (wallpaper, etc.) is in use.
This function does not work correctly with some graphics boards.
•
•
If the screen is not displayed correctly even after adjusting in step 1 above, perform the
adjustments according to the procedures on the following pages. When the screen is
displayed correctly, go to step 5 “To adjust color gradation automatically [Range]”.
2
Prepare the display pattern for the analog display adjustment.
Download the “Screen adjustment pattern files” from our site: http://www.eizo.com.
Tips
For details and instructions on opening the “Screen adjustment pattern files”, refer to the “Readme.
txt” file.
•
3
Perform the auto adjustment again with the analog screen
adjustment pattern displayed.
●
To adjust flickering, screen position, and screen size automatically
[Auto Adjustment]
Procedure
Display Pattern 1 of the screen adjustment pattern files in full screen on the monitor.
Choose <Screen> from the Adjustment menu, and press
.
1.
2.
3.
1.
2.
