Chapter 5 Reference
5-2. Connecting More than Two PCs to the
Monitor
More than two PCs can be connected to the monitor through the DVI-I and the DisplayPort
connector on the back of the monitor.
●
To switch the input signal
The input signal switches each time
is pressed.
When the signal is switched, the active input port name appears at the top right corner of the
screen.
●
To set input signal selection [Input Signal]
The monitor recognizes the connector through which PC signals are input.
Priority setting
Function
Auto
When a PC is turned off or enters the powersaving mode, the monitor
automatically displays another signal.
Manual
The monitor detects only the PC’s signals currently displaying
automatically. Select an active input signal with
.
DisplayPort
Connector DVI-I Connectors
Procedure
Choose <Tools> from the Adjustment menu, and press
.
Choose <Input Signal> from the <Tools> menu, and press
.
The <Input Signal> menu appears.
Select “Auto” or “Manual” with
or
.
Press
to exit the adjustment.
Attention
When “Auto” is selected for <Input Signal>, the monitor’s power-saving function works only when more
than two PCs are in the power-saving mode.
•
1.
2.
3.
4.
English
